Measure Ring Size

Fit and comfort

How to resize a ring

Most plain metal rings can be resized up or down by a jeweller — but not every ring can, and not by every amount. What can be resized, what it typically costs, how long it takes, and the temporary fixes for a ring that is only a little loose.

Reviewed against ISO 8653:2016 · Last updated 2026-11-09 · How we calculate — methodology

Note: Yes, most plain gold and platinum rings can be resized bigger or smaller by a jeweller, usually by about one to two sizes. Rings in tungsten, titanium, ceramic or stainless steel usually cannot be resized at all, and eternity bands, tension-set stones and heavily engraved rings are often difficult or impossible. A simple resize is commonly quoted in published US guides at roughly $20–$150, with complex work running to several hundred dollars — prices vary widely by metal, design and jeweller, so ask for a quote before committing.

Can a ring be resized bigger or smaller?

Resizing means cutting the band, adding or removing metal, and rejoining it — then refinishing so the join is invisible. Going smaller means cutting out a piece of the band; going bigger means cutting the band and adding metal, or stretching it for a small increase. Both directions are routine for a plain band, and both are limited: the further a ring moves, the more the band's shape, thickness and stone settings are stressed. A jeweller who has the ring in hand can tell you whether yours is a resize or a remake — no guide can decide that from a description.

Which rings can — and cannot — be resized

  • Usually resizable: plain gold and platinum bands, including most wedding bands and solitaire settings with a plain shank. Silver is also generally resizable, though it is softer and marks more easily.
  • Usually not resizable: tungsten, titanium, ceramic and stainless steel rings. These metals are too hard or too brittle to cut and rejoin the way gold is, so a wrong size usually means exchanging or remaking the ring.
  • Difficult or risky: eternity bands (stones all the way around — there is no plain metal to cut), tension-set stones (the setting relies on the band's exact tension), rings with engraving or milgrain running around the whole band (the pattern is interrupted by the cut), and rings with stones set into the shank.
  • Ask before you buy: if you are ordering a ring in a metal or style above and you are unsure of the size, ask the seller whether it can be resized later and what that costs. That answer matters more than any guide.

How many sizes is realistic?

As jeweller guidance, not a standard: a simple band can usually be resized by about one to two sizes up or down. A half size or one size is the safest territory. Beyond about two sizes, the band can become visibly out of round, thin at the join, or loose around its stones — and many jewellers will recommend remaking the ring instead. Wide bands and patterned bands tolerate less movement than thin plain bands. If the change you need is larger than two sizes, get a quote for both a resize and a remake and compare them before deciding.

What does resizing cost, and how long does it take?

Published US guides commonly quote roughly $20–$150 for a simple resize, with complex work — adding a significant amount of metal, moving or resetting stones, resizing an eternity band — running to several hundred dollars. The guides disagree with each other, and the real price depends on the metal (platinum costs more to work than gold), the design, how many sizes it moves, and the jeweller. Treat any figure here as a range to check, never as a fixed price: ask your jeweller for a quote for your specific ring, in writing, before agreeing to the work.

Time varies the same way. A simple resize at a jeweller with an in-house workshop is often done within a few days, sometimes the same day; a ring sent away to an outside workshop, or a complex resize, commonly takes one to two weeks. Ask for a time estimate with the quote, and confirm whether the ring stays on the premises or is sent away.

Resizing vs remaking

  • Resize when the ring is a plain band, the change is about one to two sizes, and the stones and pattern can survive the cut. It is cheaper and faster than a remake.
  • Remake when the change is larger, the ring cannot be cut (tungsten, titanium, ceramic, eternity band), or the design would be damaged by resizing. A remake keeps the design and stones but builds a new band at the right size.
  • Exchange is sometimes the cheapest option of all: if the ring is new and the seller offers exchanges, swapping it for the right size beats paying for either.

Make a ring smaller without resizing

If the ring is only a little loose — about half a size to one size — or the finger changes size through the day, a temporary sizing aid can be the right answer instead of a permanent resize:

  • Plastic sizing coil: a clear spiral that wraps inside the band. Cheap, removable, and easy to try — but it can feel bulky, trap moisture, and wear out.
  • Sizing beads: two small metal beads soldered inside the shank. They grip the finger and stop the ring spinning, and a jeweller can remove them later. They suit rings that spin because of a large knuckle gap.
  • Spring insert: a thin metal spring inside the band that flexes over the knuckle and then grips the base of the finger. Comfortable for knuckle problems, but it can need adjusting and is not invisible.
  • Hinged sizing guard / shank: a hinged section that opens to pass the knuckle and closes snugly at the base. The most secure temporary option for a big knuckle gap — and the most expensive.

A sizing aid is a stopgap: if the ring is more than about one size too big, or the aid pinches, spins or irritates the skin, a proper resize (or a remake) is the better fix.

What to ask the jeweller

  • Can this exact ring be resized, and by how many sizes in each direction?
  • What will it cost, and does the quote include refinishing and any stone checking?
  • How long will it take, and does the ring stay in your workshop or go elsewhere?
  • Will resizing affect the stones, the engraving, the pattern, or any warranty?
  • If it cannot be resized, what would a remake or an exchange cost?
  • Should I be re-measured first — and can you measure me here, in the evening, with warm hands?

Frequently asked questions

No. Plain gold and platinum bands are usually the easiest to resize. Tungsten, titanium, ceramic and stainless steel rings generally cannot be resized because the metal cannot be cut and rejoined the same way, and eternity bands, tension-set stones and rings with engraving or milgrain around the whole band are often difficult or impossible to resize without damage.

Limitations

There is no published standard for resizing: how far a ring can go, what it costs and how long it takes all depend on the individual ring and the jeweller doing the work. The figures on this page are ranges from published jeweller guides, which disagree with each other; they are a starting point for a conversation with your jeweller, not a price list. If a jeweller says your ring cannot be resized, that is a judgement about your ring, not a contradiction of this page.

Related guides