Measure Ring Size

Interactive tool

Measure your ring size

Choose a method below. The screen sizer needs a bank card and a ring that fits; the typed calculator needs a measurement you already have.

Step 1 — Calibrate with a bank card

Step 1 of 2

Place a real bank card flat against the screen. Adjust the rectangle below until its edges line up with the card. The rectangle's height follows the card's proportions automatically, so matching the width also checks the height.

If the rectangle is wider than your screen, rotate to landscape or use a larger screen — do not guess the card's width.

No size is shown until you confirm calibration. Skipping calibration would produce a fabricated result, so the tool refuses to guess.

Reference: standard bank card, 85.60 mm × 53.98 mm (ISO/IEC 7810 ID-1). Dragging a circle over a ring without this step does not produce a measurement — the tool refuses to show a size until calibration is confirmed.

Step 2 — Match the circle to the ring's inner edge

Step 2 of 2

Note: Complete calibration above first. The circle below is a preview only — it is not a measurement until calibration is confirmed.

Diameter and circumference appear here once calibration is confirmed.

Enter a diameter in millimetres, then Apply. Values outside the chart (US 3–13.5) still show your millimetres, with no size label.

Highlight my country's size
Place the ring flat on the screen, centred on the circle. The circle must follow the inner edge — the hole — not the outer band. Keep the ring flat; tilting it changes the apparent diameter.

All ring tools

Before you start

  1. Measure in the evening

    Hands are warm and at their largest in the evening. Avoid measuring straight after exercise or in a cold room.

  2. Measure the right finger

    Finger sizes differ between hands and fingers. Measure the exact finger the ring will be worn on.

  3. Repeat and take the largest

    Measure two or three times. If readings differ, use the largest — a ring must clear the knuckle to be worn.

Why you can trust this result

  • Calibration uses a standard bank card (85.6 mm wide, ISO/IEC 7810 ID-1) — a physical reference, not a guess about your screen.
  • Your measurement is calculated in your browser and is not sent to a server. There is no account and no advertising.
  • Results are guidance, not a guarantee. For an expensive or hard-to-resize ring, confirm with a professional fitting.

Related guides